Bevel Box, Differentiating, Golf And Golf Wagon
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Either the "0AV" Bevel Box or "0CN" Bevel Box is Installed.
The bevel boxes can be differentiated as follows:
Differentiation; Bevel Box Installed:
The bevel box is identified by a cut-out -arrow- near the right area of the subframe.
-- Remove the noise insulation if necessary. Refer to OVERVIEW - NOISE INSULATION .
The area indicated by the -arrow- has either the "0AV" or "0CN" designation.
Additional Differentiation: Bevel Box Removed:
The Output Flange is Secured with a Hex Nut on a "0AV" Bevel Box.
The Output Flange is Secured with a Twelve-Point Nut on a "0CN" Bevel Box.