Overview - Assembly Mounts: Notes

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Assembly Mounts Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Engine Support
- Refer to OVERVIEW - SUBFRAME MOUNT .
Engine Mount
- Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
Pendulum Support
- Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- For pendulum support to subframe
- Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- For pendulum support to transmission
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Transmission with threaded insert. Refer to Transmission with Threaded Insert (for example Heli Coil) for Attaching the Pendulum Support
Bolt
- For pendulum support to transmission
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Transmission with threaded insert. Refer to Transmission with Threaded Insert (for example Heli Coil) for Attaching the Pendulum Support
Bolt
- 60 Nm +90°
- Replace after removing
- For transmission mount to transmission bracket
- Tightening sequence. Refer to Attaching the Transmission Mount 2 to the Transmission Bracket 1 .
Bolt
- 60 Nm +90°
- Replace after removing
- For transmission mount to transmission bracket
- Tightening sequence. Refer to Attaching the Transmission Mount 2 to the Transmission Bracket 1 .
Transmission Mount
- Check the adjustment. Refer to SUBFRAME MOUNT, ADJUSTING
- Adjusting. Refer to SUBFRAME MOUNT, ADJUSTING
Bolt
- Transmission mount to chassis
- Refer to OVERVIEW - SUBFRAME MOUNT .
Bolt
- 60 Nm +90°
- Replace after removing
- For transmission bracket to transmission
- Tightening sequence. Refer to Transmission Bracket 1 to Transmission. .
Transmission Bracket
Bolt
- 60 Nm +90°
- Replace after removing
- For transmission bracket to transmission
- Tightening sequence. Refer to Transmission Bracket 1 to Transmission. .