LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 50 (Gears & Shafts System (Service Information - 5-Speed Manual Transmission - 0AF)) >> 35 Gears, Shafts >> Output Shaft >> Output Shaft, Disassembling And Assembling >> Remove The Roller Bearing From The Clutch Housing

Remove The Roller Bearing From The Clutch Housing

WARNING: This page is about a different variant/trim than selected.
GWWA35-0034Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Compress the cylindrical roller bearing locking ring -arrow- with pliers -C- and remove it.

A - Counter Support, for example :22/1 

B - Internal Puller 30 to 37 mm, for example, Puller - Kukko Internal - 28-37mm :21/5 

scientia non olet · About LEMON Manuals