Left Seal, Replacing: Installing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lightly oil new seal on outer circumference.

-- Fill the space between the sealing and dust lip -arrow- halfway with Sealing Grease :G 052 128 A1 .

-- Install the seal all the way in without tilting it.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the flange shaft.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hold the flange shaft to the transmission and tighten.

-- Install the left drive axle. Refer to DRIVE AXLE .

-- Install the lower section of the left front wheel housing liner or the left front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Install the wheel. Refer to WHEEL, CHANGING .

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Install the noise insulation. Refer to NOISE INSULATION .

Tightening Specification