Lower Toothed Belt Guard, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

NOTE:

If a new toothed belt guard is installed, the guide tabs -arrow - must be disconnected before installing.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the toothed belt guard, pay attention to the alignment pins -arrow- while doing so.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the toothed belt guard.

-- Install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .