Flywheel, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

Risk of destroying the flywheel.

Remove the bolts -B- by hand. Do not use an air-powered or impact wrench.
When removing the bolts, make sure that the bolt head does not come in contact with the flywheel.
Turn the flywheel -A- so that the bolts -B- line up with the center of the holes -arrows-.

-- Insert the :3067 into the hole on the cylinder block -B- and loosen the flywheel bolts.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts and the flywheel.