Ribbed Belt, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Mount The Ribbed Belt On The Ribbed Belt Pulley 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Vibration damper
2. Tensioning Roller
3. Generator
4. A/C Compressor

-- Hold the tensioner with a wrench and remove the :T10060A  .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the tension on the tensioner.

-- Check the ribbed belt for correct positioning.

-- Start the engine and check the ribbed belt routing.