Overview - Belt Pulley Side Sealing Flange: Notes
WARNING: This page is about a different variant/trim than selected.
- Sealing Flange, Belt Pulley Side
- Replace after removing.
- With crankshaft seal
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .
- Bolt
- Tightening specification and sequence. Refer to Figure.
- Crankshaft Toothed Belt Sprocket
- There must be no oil on the contact surface between the toothed belt sprocket and crankshaft
- Only possible to install in one position
- Bolt
- Tightening specification. Refer to OVERVIEW - TOOTHED BELT