Engine Support, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .

-- Raise or lower the engine using the :10-222A/11 until each bolt in the engine support is accessible.

NOTE:

The bolt -2- can only be removed after the engine support is removed.

-- Remove the bolts -1, 2 and 3- and the engine support.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.