Charge Air Cooler System Overview

CAUTION:

The charge air pipe clamps must be tightened to 5.5 Nm. An insufficient or excessive tightening torque can cause the charge air hose to come off the charge air pipe while driving.

Fig 1: Identifying Assembly Overview: Charge Air Cooler System

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 5 Nm
Mount
- For the charge air cooler.
Charge Air Cooler
- Removing and installing, refer to one of the following:
  Eos, Passat and CC, refer to .
  
  Tiguan, refer to CHARGE AIR COOLER .
Charge Air Pipe
Bolt
- 10 Nm
from the Turbocharger
Charge Air Hose
- Disconnecting and connecting, refer to CHARGE AIR HOSE, DISCONNECTING AND CONNECTING .
to the Throttle Valve Control Module
Charge Air Hose
Bolt
- 10 Nm
Bolt
- 5 Nm
Charge Air Pressure Sensor -G31-
Charge Air Pipe
Charge Air Hose
- Disconnecting and connecting, refer to CHARGE AIR HOSE, DISCONNECTING AND CONNECTING .