Cooling System Component Overview, Body Side
WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Radiator
- Removing and installing, refer to RADIATOR .
- Replace all of the coolant after replacing. Refer to DRAINING AND FILLING .
- O-ring
- Replace if damaged.
- Upper Coolant Hose
- With a quick coupling.
- Check the hose for secure seating.
- Coolant hose connection diagram. Refer to COOLANT HOSE CONNECTION DIAGRAM .
- Cap
- Check the pressure valve in the cap. Refer to COOLING SYSTEM, CHECKING FOR LEAKS .
- Connector
- Stud Bolt
- 3 Nm
- Coolant Expansion Tank
- Cooling system, checking for leaks. Refer to COOLING SYSTEM, CHECKING FOR LEAKS .
- Lower Coolant Hose
- With a quick coupling.
- Check the hose for secure seating.
- Coolant hose connection diagram. Refer to COOLANT HOSE CONNECTION DIAGRAM .
- Nut
- 5 Nm
- Bolt
- 5 Nm
- Coolant Fan 2 -V177-
- Coolant Fan -V7-
- Connector
- Fan Shroud
- Removing and installing, refer to FAN SHROUD AND FANS .