Primary Lock

The primary lock is the locking mechanism of one individual crimp contact in the terminal housing.

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts, refer to SECONDARY LOCK .

The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the primary lock.

• Round connector systems, refer to ROUND CONNECTOR SYSTEMS .
• Flat connector systems, refer to FLAT CONNECTOR SYSTEMS .
• Special connector systems, refer to SPECIAL CONNECTOR SYSTEMS .

The application of the correct release tools to the respective locks can be found in the table in the Operating Instructions for Release Tool SetVAS 1978/35.