Seat Drawer Mount

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.

Removal

-- Remove seat drawer -1- from mount.

-- Remove front seat. Refer to FRONT SEAT .

-- Remove left trim on seat:

Seat without folding backrest. Refer to LEFT SEAT TRIM .
Seat with folding backrest. Refer to RIGHT FOLDING PASSENGER SEAT TRIM .

-- Remove bolt -2- (2 Nm).

-- Remove bolts -3- (2 Nm).

-- Remove mount -4- from seat frame.

Fig 1: Identifying Mount For Seat Drawer Remove/Install Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installation

-- To install, perform the steps used for removal in reverse order.