Radio Code, Setting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic tool access requirements

The diagnostic tool is connected to the central database (Carport, Fazit) via the Central Partner Network (CPN).
The existing access authorization for the "GeKo" system

NOTE:

The radio codes can be requested in the central database and shown on the diagnostic tool display.

To activate the radio, the codes must be entered via the radio keys, as before. Refer to RADIO/NAVIGATION SYSTEM ANTI-THEFT CODING, ACTIVATING .

Procedure

-- Connect the diagnostic unit. Refer to VEHICLE TESTER, CONNECTING .

-- Switch the ignition on.

-- Touch button/field on screen: >>GUIDED FUNCTIONS<<.

-- Press the > button to confirm.

-- Select in succession:

Brand
Type
Model year
Engine Code

-- Confirm vehicle identification.

-- Select in succession:

"Radio system".
"Request radio code".

-- Perform code request according to instructions from "GUIDED FUNCTIONS".

-- End code request as follows:

-- Press the Go to button -arrow- on display.

-- Press the End button on the display.

-- Press Exit button in exit menu.

-- Turn off ignition and disconnect diagnostic connection.