EVAP System: Notes
The following table provides quick links to all instructions in this section.
| EVAP SYSTEM, DETECTING LEAKS | |
| EVAP CANISTER PURGE REGULATOR VALVE, CHECKING | |
| LEAK DETECTION PUMP, CHECKING |
For all EVAP system component locations and hose routing. Refer to EVAP SYSTEM COMPONENTS .
For all EVAP system removal/installation procedures and torque specifications. Refer to EVAP SYSTEM COMPONENTS .
All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through VW.
Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
The manufacturers test box Test Box 105 Pin VAG1598/42 is available for purchase or rental.