Charge Air Cooler Overview
WARNING: This page is about a different variant/trim than selected.
NOTE:
Noise generator overview. Refer to NOISE GENERATOR OVERVIEW .
- Bolt
- 5 Nm
- Mount
- For the charge air cooler.
- Charge Air Cooler
- Removing and installing, refer to CHARGE AIR COOLER .
- Charge Air Pipe
- Bolt
- 8 Nm
- Charge Air Hose
- Installing, refer to CHARGE AIR HOSE, INSTALLING .
- Charge Air Pipe
- To the noise generator.
- Charge Air Hose
- Installing, refer to CHARGE AIR HOSE, INSTALLING .
- Hose Clamp
- Charge Air Hose
- To the throttle valve control module.
- Charge Air Hose
- Charge Air Pipe
- Charge Air Hose
- Bolt
- 8 Nm
- Noise Generator
- Overview, refer to NOISE GENERATOR OVERVIEW .
- Charge Air Pipe
- Charge Air Hose
- Installing, refer to CHARGE AIR HOSE, INSTALLING .
- Charge Air Pressure Sensor -G31-
- Bolt
- 5 Nm