General Repair Information
WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If an exchange cylinder head is installed, all contact surfaces between the bearing elements, roller rocker levers and cam running surfaces of the camshaft must be lubricated before installing the cylinder head cover.
The plastic protectors installed to protect the open valves must only be removed immediately before installing the cylinder head.
The coolant must be replaced when replacing the cylinder head. Refer to DRAINING AND FILLING .
Intake manifold removing and installing. Refer to CYLINDER HEAD COVER .
Intake manifold assembly overview. Refer to INTAKE MANIFOLD ASSEMBLY OVERVIEW .