LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Final Drive, Differential - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 39 Final Drive, Differential >> Disassembly And Assembly >> Differential >> Removing the Spring Pin without Surrounding Groove (long spring pin): Removing the Differential Bevel Gear Axle

Removing the Spring Pin without Surrounding Groove (long spring pin): Removing the Differential Bevel Gear Axle

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spring Pin Without Surrounding Groove (Long Spring Pin), Removal: Press Out Differential Bevel Gear Axle
GWWN39-1035Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Spring pin is sheared off when it is removed.

-- Drive remaining part of roller pin out of differential housing.

scientia non olet · About LEMON Manuals