LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Final Drive, Differential - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 39 Final Drive, Differential >> Disassembly And Assembly >> Differential >> Removing the Outer Race/Tapered Roller Bearing from the Clutch Housing

Removing the Outer Race/Tapered Roller Bearing from the Clutch Housing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tapered Roller Bearing Outer Race Driven Out Of Clutch Housing Using Special Tools VW408 & VW473
GWWV39-1681Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the sleeve for the seal/flange shaft beforehand.

scientia non olet · About LEMON Manuals