LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Final Drive, Differential - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 39 Final Drive, Differential >> Disassembly And Assembly >> Differential >> Installing the Outer Race/Tapered Roller Bearing into the Clutch Housing

Installing the Outer Race/Tapered Roller Bearing into the Clutch Housing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Outer Race/Tapered Roller Bearing Pressed Into Clutch Housing
GWWV39-1682Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

There is no adjusting shim on the side of the clutch housing.

scientia non olet · About LEMON Manuals