Knock Sensor 1 -G61-

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the electrical connector -2- from the knock sensor 1.

Fig 1: Identifying Electrical Connector -2- To Knock Sensor 1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Remove the coolant pump. Refer to COOLANT PUMP .

NOTE:

The knock sensor 1 is located below the intake manifold behind the coolant pump.

-- Remove the knock sensor 1.

Installing

-- Installation is performed in reverse order.

Tightening specifications, refer to IGNITION SYSTEM COMPONENT OVERVIEW .