LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (3.2L - Crankshaft, Cylinder Block - Engine Code(S): CBRA) >> 13 Crankshaft, Cylinder Block >> General Information >> General Repair Information

General Repair Information

WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Secure the engine to the engine and transmission holder VAS 6095 when working on the engine. Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .

If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication of a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:

Carefully clean the oil passages

Replace the oil injection jets

Replace the oil cooler

Replace the oil and filter

scientia non olet · About LEMON Manuals