Engine, Securing To Engine And Transmission Holder

WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Lifting tackle 3033
Shop crane VAS 6100
Engine and transmission jack VAG 1383A
Engine support 3269

Secure the engine to the VAS 6095 when working on it.

Procedure

-- Remove the transmission.

-- Install the 3033 as follows and lift the engine using the VAS 6100 off of the VAG 1383A.

Fig 1: Engaging Engine Sling 3033 & Lifting Engine Using Shop Crane VAS 6100

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vibration damper side: Position 3.

Flywheel side: Position 11.

When Using the VAS 6095 with Universal Mounts

-- Secure the engine to the VAS 6095 as shown.

Fig 2: Identifying Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If The 3269 Is Used

-- Bolt the 3269 to the cylinder block as shown.

Fig 3: Identifying Engine Support 3269 Tightly Bolted To Cylinder Block

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.