LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (2.0L - Turbocharger, Supercharger - Engine Code(S): CBFA & CCTA) >> 21 Turbocharger, Supercharger >> Description And Operation >> Turbocharger Component Overview >> Coolant Supply And Oil Pipes

Coolant Supply And Oil Pipes

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Assembly Overview: Turbocharger - Part II
GWWA21-10134Courtesy of VOLKSWAGEN UNITED STATES, INC.
  1. Seal 
    • Always replace.
  2. Banjo Bolt 
    • 33 Nm
  3. Oil Supply Pipe 
  4. Turbocharger 
    • Can only be replaced with the exhaust manifold and vacuum diaphragm.
    • Removing and installing, refer to TURBOCHARGER .
  5. Bolt 
    • 9 Nm
  6. Bolt 
    • 9 Nm
  7. Seal 
    • Always replace.
  8. Banjo Bolt 
    • 38 Nm
  9. Bolt 
    • 9 Nm
  10. Banjo Bolt 
    • 38 Nm
  11. Seal 
    • Always replace.
  12. Coolant Supply Pipe 
  13. O-ring 
    • Always replace.
  14. Bolt 
    • 9 Nm
  15. Gasket 
    • Always replace.
  16. Oil Return Pipe 
  17. Bolt 
    • 9 Nm
  18. Gasket 
    • Always replace.
scientia non olet · About LEMON Manuals