LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (3.2L - Exhaust System, Emission Controls - Engine Code(S): CBRA (As Of 11.08)) >> Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Clamping Sleeve Nut - 25
Exhaust Manifold to Cylinder Head Nut (1) - 25
Front Exhaust Pipe with Catalytic Converter to Exhaust Manifold Nut (1) - 40
Front Intake Manifold Support to Intake Manifold Bolt - 20
Intake Manifold Support to Exhaust Manifold Heat Shield Bolt - 20
Oxygen Sensor - 55
Secondary Air Injection Connecting Piece Bracket Bolt - 9
Secondary Air Injection Connecting Piece to Cylinder Head Bolt - 10
Secondary Air Injection Connecting Piece to Secondary Air Injection Combination Valve Bolt - 10
Secondary Air Injection Pump Motor Bracket to Cylinder Block Bolt (2)
  - 10
- 20
Secondary Air Injection Pump Motor to Bracket Nut - 10
Secondary Air Injection Sensor 1 to Pressure Hose Bolt - 2
Suspended Mount to Body Bolt - 25
Suspended Mount to Subframe Bolt - 25
Vacuum Reservoir Bracket to Body Bolt - 25
(1) Always replace
(2) For clarification, see -items 22 and 24- in SECONDARY AIR INJECTION SYSTEM COMPONENTS ASSEMBLY OVERVIEW .
scientia non olet · About LEMON Manuals