Right Bucket Seat Trim
NOTE:
The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.
Removing
-- Remove the front seat. Refer to FRONT SEAT .
-- Remove the front seat belt latch:
- 2-door: BELT LATCH, 2-DOOR
- 4-door: BELT LATCH, 4-DOOR
-- Push the clamping pin -1- toward the inside and remove the clip -2-.
-- Press tab -3- upward and remove trim -4- from seat.
Installing
-- Install in reverse order of removal.