Center ventilation grid and air guide (Golf R32), assembly overview

1 - Bumper cover 

• Material - PP/EPDM
• Removing. Refer to Bumper cover (Golf R32), removing and installing 

2 - Air duct 

3 - Bolt 

• Qty. 6
• 1.5 Nm

4 - Speed nut 

• Qty. 6

5 - Clip 

• Qty. 12

6 - Center ventilation grid 

• Removing

• Remove bumper cover.
• Remove clamps.
• Remove center ventilation grid.

• Installing: 

Installation is performed in the reverse order of removal. Note the following:

• Damaged clamps must be replaced.