Bumper cover (Golf R32), removing and installing

Fig 1: Exploded View Of Bumper Cover (Golf R32)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Disconnect release lever from lid lock. Refer to Release lever, removing  .
• Remove radiator grille. Refer to Radiator grill, removing and installing  .
• Pull off covers - 9  - for headlight cleaning system from bumper cover and unclip.
• Loosen bumper cover - 1  - in area of wheel-housing - 4  -.

• Unclip left ventilation grid - 10  - and right ventilation grid - 12  -.
• Remove bolts - 2  -. Remove bumper cover - 1  - from guide pieces - 3  - (left and right sides).
• Disconnect harness connector from temperature sensor.

Installing 

Installation is performed in the reverse order of removal.