Right Flange Shaft Seal, Differentiating
WARNING: This page is about a different variant/trim than selected.
The seal -1- for the right flange shaft is inside the sleeve -2-.
There are different versions:
The seal -1- and the sleeve -2- are two separate parts. Characteristics: notches are arranged around the sleeve -arrow-.
Seal, replacing. Refer to RIGHT FLANGE SHAFT, SEAL AND SLEEVE, TWO PIECE .
The seal -1- and the sleeve -2- are a single part. Characteristics: no openings around the sleeve.
Replace the seal and the sleeve together. Refer to RIGHT FLANGE SHAFT, SEAL AND SLEEVE, ONE PIECE .