Installing the Differential Planetary Gears and Differential Bevel Gear Axle

Fig 1: Identifying Differential Bevel Gears And Differential Bevel Gear Axle, Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert thrust washer union with transmission fluid.

-- Install and secure both large differential planetary gears, for example, with a flange shaft.

-- Insert the small differential planetary gears 180° offset and pivot them into position.

-- Press the differential bevel gear -arrow A- up to the first small differential bevel gear.

-- Insert threaded pieces -arrow B- into the large differential planetary gears.

Installed position: Collar toward the differential bevel gear 

-- Install the differential bevel gear axle up the end position and secure it with a new spring pin.