Special Tools

Special tools and workshop equipment required 

• Thrust PadVW 512
• Replacement Stud (8 mm/10 mm)3114/2
• Thrust PadVW 447 H
• Thrust DiscVW 412
• Tube SplitVW 422
• Thrust PlateVW 401
• Thrust PlateVW 402
• PunchVW 408 A
• Thrust PadVW 447 i
• Mounting Universal Joint41-501
• Taper Roller Bearing PullerV.A.G 1582
• Attachment to VAG 1582V.A.G 1582/4
• Attachment to VAG 1582V.A.G 1582/5
• Driving Sleeve32 - 111
• PunchVW 409
• Support ChannelsVW 457
• SleeveVW 519
• Thrust RingVW 429
• Tube 60 mm Dia.VW 415 A
• Thrust TubeVW 454
• Thrust TubeVW 455
• PunchVW 411
• Centering Mandrel 12 - 551
• -1- Kukko Extractor 37-46 mm21/6
• -1- Kukko Extractor 14.5-18.5 mm21/2
• -3- Kukko Separating Tool 22-115 mm17/2
• -3- Kukko Separating Tool 12-75 mm17/1
• -4- Kukko Support22/1
• -4- Kukko Support22/2
  Fig 1: Identifying Kukko Tools

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Inductive Heater VAS 6414
  Fig 2: Inductive Heater VAS 6414

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 3: Identifying Special Tools -- Input Shaft, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Dial Gauge HolderVW 387
• Magnetic Plate 50 mm Dia.VW 385/17
• Thrust PadVW 510
• Thrust PadVW 447 i
• PunchVW 407
• Torque Wrench (5-50 Nm)V.A.G 1331