LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

WARNING: This page is about a different variant/trim than selected.
Fig 1: Pressing Off Locking Collar With Synchronizer Hub And Bearing Mount
GWWN35-0325Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock ring -arrow- beforehand.

scientia non olet · About LEMON Manuals