LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Bearing Inner Race/Large Tapered Roller Bearing

Removing the Bearing Inner Race/Large Tapered Roller Bearing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Pulling Off Large Inner Race/Tapered Roller Bearing
GWWV35-1132Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-A- vice protectors

-- Before installing puller, insert a bolt M10 x 20 in the bore of the output shaft.

scientia non olet · About LEMON Manuals