Transmission, Transporting

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

-- Install the 3336 to the clutch housing.

Fig 1: Identifying Transmission Support Jig 3336 Secured To Clutch Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the support arm on the sliding bar using the locking bolt -arrow-.

Fig 2: Identifying Support Arm Adjusted On Sliding Piece With Locking Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Number of visible holes = 5.

-- Lift the transmission using a workshop crane and the 3336.

-- Set the transmission down, for example, into the transport container.