LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission Housing And Clutch Housing >> Installing The Sleeve And Seal

Installing The Sleeve And Seal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Spindle And Nut To Pull Sleeve And Seal
GWWN34-1700Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the seal seat inside the transmission.

-- Attach the spindle -A- on the 3066 into the threaded piece on the differential.

-- Turn the nut -B- and pull the sleeve all the way over the T10148.

NOTE:

If the transmission is disassembled, press the sleeve in onto the stop using the T10148.

scientia non olet · About LEMON Manuals