LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Removing The Angular Contact Ball Bearing

Removing The Angular Contact Ball Bearing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Angular Contact Ball Bearing
GWWV34-2025Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Be careful not to bend the shift forks when removing and installing the angular contact ball bearing.

scientia non olet · About LEMON Manuals