LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Installing The Lock Washer

Installing The Lock Washer

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Socket Driver & Jaw Protectors
GWWV34-2024Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the lock washer in the groove in the shift segment using a socket wrench

NOTE:

The shift segment must still rotate easily after the lock washer is installed.

A - 10 mm socket wrench

B - Protective jaws

scientia non olet · About LEMON Manuals