LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Lever And Housing, Through 10.06 >> Lock Washer, Removing And Installing

Lock Washer, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Locking Washer, Spacer Bushing & Stop
GWWN34-1363Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the bushing -arrow B- all the way in the -direction of arrow C- and remove or install the lock washer -arrow A-.

NOTE:

Do not tilt the bushing when pushing it down.

The slot in the lever for the lock washer must be visible.

Carefully release the tension on the spring.

scientia non olet · About LEMON Manuals