Shift Knob And Boot
WARNING: This page is about a different variant/trim than selected.
- Badge
- Can be carefully pried out of a plastic or leather shift knob
- Shift Knob
- With boot
- The shift knob and boot cannot be separated from each other.
- Always replace together.
- Removing and installing, refer to SHIFT KNOB, BOOT AND NOISE INSULATION .
- Clamp
- For securing the shift knob to the shift lever.
- Attach to the shift knob -item 2- using V.A.G 1275.
- Always replace.
- Center Control Cover
- Combined as one piece with the center console upper section on some versions.
- Noise Insulation
- Not on all vehicles
- Arrow on noise insulation points in direction of travel.
- Retaining tab spacing varies.
- Therefore can only be arranged in one position.