Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Clutch slave cylinder to transmission, see - item 9-.

Transmission shift lever to shift shaft, see - item 18- SHIFT AND SELECTOR CABLES .

Cable bracket to transmission, see - item 6- SHIFT AND SELECTOR CABLES .

Transmission support to transmission bracket and transmission:

Fig 1: Identifying Transmission Support And Slave Cylinder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the bolts.

-- Tighten all bolts hand tight.

-- Tighten the bolts to specification.

Bolts -arrows-

20 Nm + 90° (1/4) additional turn