Bleeding sequence

WARNING: This page is about a different variant/trim than selected.

1 - Left front brake caliper

2 - Right front brake caliper

3 - Left rear wheel cylinder/brake caliper

4 - Right rear wheel cylinder/brake caliper

With hose still connected, leave the respective bleeder screw open until brake fluid is free from air bubbles out of the bleeder screw.

A test drive must be carried out after bleeding brakes. When doing this an ABS application must be performed at least once!

Changing brake fluid

Refer to BRAKE FLUID, CHANGING (every 2 years)

Pre-bleed the brake system when at least one chamber in the brake fluid reservoir is completely empty (e.g. leaks in braking system).