LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (5 AND 6 SPD. MANUAL TRANSMISSION 02M (2002-05) (A4 Platform)) >> 35 Manual Transmission - Gears, Shafts >> Input Shaft, Disassembling And Assembling >> Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing

Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing
GW00001672Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmissions from build date 06 04 0

The recesses for locking plate (See Figure ) on outer race/tapered roller bearing (arrow -A-) and clutch housing (arrow -B-) must align.

scientia non olet · About LEMON Manuals