LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Controls, Housing - Manual Transmission 02Q (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Description And Operation >> Transmission Component Overviews >> Notes

Transmission Component Overviews: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transmission Assembly Overview
GWWM34-0373Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. I - TRANSMISSION HOUSING AND SHIFT UNIT 
  2. II - INPUT SHAFT, OUTPUT SHAFTS, DIFFERENTIAL AND SELECTOR RODS 
NOTE:

Metal and plastic sealing caps are installed for the input shaft.

The plastic sealing cap does not require the circlip -A-.

Fig 2: Identifying Input Shaft Sealing Cap Types
GWWN34-11688Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
I = Metal Sealing Cap for the Input Shaft
Through transmission build date 20 January 2008 >>Without<< a circlip -A- Disassembly and assembly, refer to TRANSMISSION, WITHOUT A SEALING CAP CIRCLIP .
From transmission build date 21 January 2008 >>With<< a circlip -A- Disassembly and assembly, refer to TRANSMISSION, WITH A SEALING CAP CIRCLIP OR A PLASTIC COVER .
II = Plastic Sealing Cap for the Input Shaft
>>Without<< a circlip -A- Disassembly and assembly, refer to TRANSMISSION, WITH A SEALING CAP CIRCLIP OR A PLASTIC COVER .
scientia non olet · About LEMON Manuals