Turbocharger General Information
The following table provides quick links to all chapters in this section.
| SAFETY PRECAUTIONS | |
| CLEAN WORKING CONDITIONS | |
| ON BOARD DIAGNOSTIC GENERAL INFORMATION | |
| WASTEGATE BYPASS REGULATOR VALVE, CHECKING | |
| CHARGE AIR PRESSURE SENSOR, CHECKING |
For all Turbocharger, G-Charger component locations, refer to Description and Operation .
For all Turbocharger, G-Charger system removal/installation procedures and torque specifications, refer to Removal and Installation .
Check the Technical Bulletins for information that may supersede any information included in this manual.
All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through VW.
Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
The manufacturers test box Adapter - 68 Pin VAG 1598/18 is available for purchase or rental.