Installed Position Of Gear Selector Mechanism

Fig 1: Identifying Gear Selector Mechanism Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Gear change cable

B - Gate selector cable

C - Heat shield

Arrow -A- Gear selection movement

Arrow -B- Gate selection movement

1 - Gear selector lever

2 - Relay lever

Fig 2: Manual Transmission - Parts I, II & III

Courtesy of VOLKSWAGEN UNITED STATES, INC.

I - Removing and installing shift knob and cover. Refer to Shift lever knob and cover, removing and installing

II - Servicing shift lever and shift housing. Refer to Shift lever and shift lever housing, servicing

III - Assembly overview: Removing and installing operating cables. Refer to Selector cables, assembly overview

Removing and installing selector mechanism. Refer to Gear selector mechanism, removing and installing

Adjusting selector mechanism. Refer to Gear selector mechanism, adjusting

NOTE:

Before working on the selector mechanism, disconnect Ground (GND) strap from the battery in the engine compartment.
Note radio code on vehicles with coded radio.

Special tools and equipment

Fig 3: Torque Wrench V.A.G. 1331 (5 To 50 Nm)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 4: VAG 1275 Pliers

Courtesy of VOLKSWAGEN UNITED STATES, INC.