II - Reverse gear clutch -K2- to large sun gear, removing and installing

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Reverse Gear Clutch -K2- To Large Sun Gear Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Refer to Overview, Planetary gearbox, disassembling and assembling -Overview- .
Disassembling planetary gearbox. Refer to Planetary gearbox, disassembling and assembling .
Assembling. Refer to Assembling planetary gearbox .

1 - Reverse gear clutch -K2-

Disassembling and assembling. Refer to Reverse gear clutch -K2-, disassembling and assembling

2 - Shim

Determining thickness. Refer to Adjusting clutch play between -K1- and -K2-, Clutch play between -K1- and -K2-, adjusting
1 or 2 shims can be installed

Fig 2: View Of Reverse Gear Clutch -K2- To Large Sun Gear Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

3 - 1st to 3rd gear clutch -K1-

Spare part is determined according to transmission code letters
Clutches -K1- and -K3- are pressed together
Disassembling and assembling. Refer to 1st to 3rd gear clutch -K1-, disassembling and assembling

4 - Seal

Always replace
To replace press -K1- off -K3-. Refer to Pressing clutch -K1- off -K3-

5 - 3rd and 4th gear clutch -K3- with turbine shaft

Spare part is determined according to transmission code letters
Disassembling and assembling. Refer to 3rd and 4th gear clutch -K3- with turbine shaft, disassembling and assembling
Clutches -K1- and -K3- are pressed together
Two different types. Refer to Torque converter, servicing

6 - 1st to 3rd gear clutch -K1- with 3rd and 4th gear clutch -K3-

Clutches -K1- and -K3- are pressed together
Pressing -K1- off -K3-. Refer to Pressing clutch -K1- off -K3-
Pressing -K1- onto -K3-. Refer to Pressing clutch -K1- onto -K3-

7 - Axial needle bearing with washer

Axial needle bearing faces small input shaft

8 - Small input shaft

9 - Needle bearing

10 - Axial needle bearing

11 - Large input shaft

12 - Axial needle bearing

13 - Axial needle bearing washer

With shoulder

14 - Large sun wheel

15 - Axial needle bearing

16 - Axial needle bearing washer

17 - Transmission housing with freewheel and circlips installed