Pressing clutch -K1- off -K3-
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
The clutches -K1- and -K3- are pressed together.
Clutch -K1- must only be pressed off -K3- if one of the clutches is to be disassembled or replaced.
- Ensure tool press surface is flat and not damaged.
The pin of tube 3110 faces to plate VW 402.
- Hold turbine shaft when pressing off.