LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installed Position: Locking Collar/Synchronizer Hub for 1st and 2nd Gears

Installed Position: Locking Collar/Synchronizer Hub for 1st and 2nd Gears

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installation Position Of Locking Collar/Synchro-Hub 1st And 2nd Gear
GWWN35-0284Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The teeth of the locking collar -arrow- point toward the splines of the 3rd/4th gear synchronizer hub -A-.

scientia non olet · About LEMON Manuals