Fuel delivery unit, removing and installing: Removing
WARNING: This page is about a different variant/trim than selected.
- Review safety measures before starting work, refer to Safety precautions when working on the fuel supply system .
NOTE:
- The battery ground strap must eventually be disconnected in the further course of work. Check whether the vehicle has a coded radio system. It may be necessary to disable the theft-deterrent feature by entering the appropriate code.
- Disconnect battery ground strap with ignition off.
- Fold rear seat forward.
- Remove cover under seat.
- Remove 4-way connector and feed and return lines from flange - arrows -.
NOTE:
- Press the tabs on the hose couplings together for this.
CAUTION:
The feed line is under pressure! Place clean rags around the hose connections, then reduce the pressure by disconnecting the hose very slowly and carefully.
- Plug lines to prevent contamination of fuel system.
- Remove union nut with union nut tool 3217.
- Remove fuel delivery unit and sealing ring through fuel tank opening.
NOTE:
- If the delivery unit is to be replaced, empty the old delivery unit before disposal.