Additional information and assembly work on vehicles with air conditioning
WARNING: This page is about a different variant/trim than selected.
CAUTION:
The air conditioning refrigerant circuit must not be opened.
NOTE:
- The refrigerant circuit must only be opened in workshops with trained personnel and the necessary range of tools and workshop equipment.
- To prevent damage to condenser and also to the refrigerant lines/hoses, ensure that the lines and hoses are not stretched, kinked or bent.
To facilitate removal and installation of engine without having to open refrigerant circuit:
- Remove retaining clamp(s) from refrigerant lines.
- Remove ribbed belt, refer to Ribbed belt, removing and installing under Ribbed belt, removing and installing .
- Remove air conditioner compressor, refer to A/C COMPRESSOR AND BRACKET .
- Secure A/C compressor to tow hook so that the refrigerant lines/hoses are not under tension.
NOTE:
- Shield bumper from damage using adhesive tape.